Are your Pipe Repair services available in Fulton?

Yes, Masters Plumbing Service provides round-the-clock Pipe Repair services directly in Fulton, MD.

How much does emergency service cost in Fulton?

We offer upfront, transparent pricing with no hidden fees for all service calls in Fulton.

🔧 Copper · PEX · Galvanized · PVC

Leaking, Corroded, or Burst Pipes in Fulton, MD? Masters Plumbing Service Fixes It

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Pipe failures range from a slow pinhole leak weeping inside a wall to a full main line rupture. Locating the failure precisely — before opening drywall or digging — is the skill that separates a clean, affordable repair from an expensive and destructive guessing operation. Masters Plumbing Service's pipe technicians in Fulton, MD use acoustic listening devices and thermal imaging cameras to find the leak first, then open only what needs to be opened.

📞 Call +1-855-718-1500 — Same-Day Service

Acoustic & Thermal Leak Location All Pipe Materials Press-Fit & Sweat Capable Licensed in MD

Licensed Pipe Repair service in Fulton, MD - Masters Plumbing Service

Our Capabilities

4 Things That Define Our Pipe Repair Service in Fulton, MD

Our techs work on every pipe material found in Fulton, MD homes, from pre-1970s galvanized to modern PEX-A crosslinked systems. The repair method matches the pipe.

🔊

Acoustic Leak Detection

Pressurized water escaping a pipe creates a characteristic acoustic signature. Our listening devices amplify ground and structure-borne sound to pinpoint a leak location within inches — through concrete slabs, behind drywall, or under flooring. This means we open only the section of wall, floor, or slab directly over the failure.

🌡️

Thermal Camera Scanning

We use thermal imaging as a complement to acoustic detection — particularly useful for slab leaks and leaks inside insulated wall cavities where sound transmission is reduced.

🛠️

All Pipe Materials & Joining Methods

Press-fit copper connections — particularly useful for repairs in occupied spaces where open flame is a concern — are available as an alternative to torch sweating where code permits.

🔒

Pressure-Tested Before We Leave

Every supply line repair is pressure-tested before we close the wall or floor. We pressurize the repaired section, hold the test pressure for the required duration, and confirm zero drop before considering the repair complete. You don't find out there's a second leak next week — we find it before we pack up.

Our Pipe Repair Services

What We Fix — Pipe by Pipe, Material by Material

From a pinhole copper leak behind a kitchen cabinet to a full galvanized repiping, our pipe crew in Fulton, MD handles the full range.

Copper

Copper Pipe Repair & Repipe

Copper failures most often involve pinhole corrosion in soft copper tubing from aggressive water chemistry, failed soldered joints, or fatigue cracks at fittings in high-vibration locations. We locate the failure precisely, cut out the failed section, and install either a sweated repair coupling or a press-fit connector — both rated to ASTM B88 standards for potable water service.

Galvanized

Galvanized Pipe Replacement

We replace galvanized supply lines with copper or PEX — either as targeted section replacement at active failure points or as a full-house repipe project. We connect the new material to existing fittings using dielectric unions where code requires to prevent galvanic corrosion at copper-to-galvanized transitions.

PEX

PEX Pipe Repair & Extension

PEX is also the material of choice for extending or reconfiguring supply runs during remodel work. Its flexibility reduces fitting count and eliminates the need for torch work inside walls.

Burst Pipes

Burst & Freeze-Damaged Pipe Repair

A burst pipe from freezing or sudden pressure surge requires immediate water shutoff and precise repair. We locate the failure, determine whether it's a single failure point or multiple freeze-damaged sections, and repair with a method appropriate to the pipe material — press-fit coupling for copper, expansion coupling for PEX-A, or a mechanical repair coupling for emergency situations.

Slab Leaks

Under-Slab Pipe Leak Repair

Supply line leaks under a concrete slab are identified by acoustic detection and confirmed by thermal imaging. Once located, we evaluate three repair options: direct-access repair (jackhammering to the pipe, repairing the section, and patching the slab); rerouting the line through the wall framing above slab to bypass the failed underground run; or epoxy pipe lining for older copper systems with systemic pinhole corrosion.

Full Repipe

Whole-House Repipe Service

When galvanized supply lines are at end of life or polybutylene pipe (recalled for chronic failure) is in the home, a full repipe with PEX or copper is the permanent solution. We run new supply lines through the structure, transition all fixture connections, pressure test the entire new system, and patch access points in walls and ceilings.

📞 Call +1-855-718-1500 — Get a Diagnosis Today

Our Process

How Our Pipe Repair Process Works in Fulton, MD

We don't open walls at random. Acoustic and thermal detection tools tell us exactly where to cut before we pick up a saw.

Call & Describe — We Shut the Water If Needed

For emergency burst pipe calls, we dispatch immediately. For suspected slow leaks, we schedule at the earliest available slot and confirm before arrival.

Pressure Test & Acoustic / Thermal Detection

We pressurize the supply system and monitor for pressure drop to confirm an active leak. Then acoustic listening devices and the thermal camera locate the failure to within a small area — telling us which section of wall, floor, or slab to open.

Flat-Rate Quote & Minimal Access Opening

For slab leaks, we present repair, reroute, and lining options with pricing so you can make an informed choice before any concrete is cut.

Repair & Pressure Test — Then You're Done

You receive a written summary of what failed, what we installed, and the warranty terms before we leave.

Customer Reviews

Real Pipe Repair Reviews from Fulton, MD Homeowners

★★★★★

My older home had a copper supply line fail inside an exterior wall. The thermal camera showed the wet zone through the drywall without any cutting. They opened a 10-inch section right at the pinhole, put in a press-fit repair coupling — no torch in my wall — pressure tested, and patched the drywall themselves. Two hours total.

— N. Bergman, Fulton

★★★★★

Our galvanized supply lines finally gave out — low pressure everywhere, rust-colored water at some fixtures. Masters Plumbing Service repiped the whole house with PEX over two days. They confirmed pressure and flow at every fixture before leaving, patched all the wall access points smooth, and cleaned up each work area. One year later, no issues at all.

— O. & R. Adeyemi, Fulton, MD

★★★★★

I noticed my water meter spinning with all fixtures off — confirmed a leak in the supply system. Masters Plumbing Service ran a pressure test and acoustic scan, found a pinhole in a copper section under the slab in the utility room. They rerouted the line through the wall above slab, tested, and closed out the permit. The reroute was exactly the same cost as direct slab access would have been, but no damaged floor tile.

— F. Okoro, Fulton, MD

Trusted Pipe Repair service in Fulton, MD - Masters Plumbing Service

Common Questions

Pipe Repair FAQ for Fulton, MD Homeowners

Watch your water meter with all fixtures off. If the meter dial is moving or the leak indicator light is turning, water is escaping somewhere in your supply system. Other signs: unexplained increases in your monthly water bill, soft or discolored spots on walls or ceilings, mold or mildew smell in a room without a visible source, or a running sound inside walls when all fixtures are off.

In some cases — particularly for older copper systems with multiple pinhole failures along a supply run — rerouting the line through accessible framing rather than repairing it in place is more practical and more permanent. We present both options when they're both viable.

A slab leak is a supply line or drain line failure in a pipe that runs through or under the concrete foundation slab. Supply line slab leaks are the more urgent scenario — pressurized water escaping under the slab saturates the subgrade, can undermine the foundation, and drives significant water bills.

Galvanized pipe corrodes from the interior outward — by the time one section fails, the rest of the pipe is in varying stages of the same process. A localized repair buys time, but another section typically fails within 1–3 years if the system is at end of life. The honest answer is: it depends on how far along the corrosion is and how many sections are already narrowed or showing surface rust.

A single localized pipe repair — finding and fixing one failure point — typically takes 1.5–3 hours including detection, access, repair, and pressure testing. Slab leak reroutes run 3–5 hours depending on the routing path and pipe length. A full-house repipe is a multi-day project — typically 2–4 days for a standard single-family home depending on size and pipe count.

For slab access openings, we clean up concrete debris, complete the pipe repair, and patch the concrete. Tile or flooring restoration over a slab patch is normally a separate trade.

Leaking, Corroded, or Burst Pipes in Fulton, MD? Masters Plumbing Service Fixes It